Bedol Water Clock Go to product viewer dialog for this item.
You will hear nothing. But you will see it: a single drop release from the upper chamber into the lower. Then another. Then a rhythm.
: Over time, minerals from tap water can coat the electrodes. If the clock stops working even with fresh water, add a few drops of white vinegar to the water to help dissolve buildup on the electrodes. bedol water clock instruction manual
: Press MODE once to enter Alarm Mode. Hold MODE until the time flashes, then use SET to adjust the alarm time.
If the screen remains blank after 1 minute, remove the electrodes, dry them, and reinsert. Ensure they are not touching each other inside the reservoir. Bedol Water Clock Go to product viewer dialog for this item
A: Absolutely. The current is minuscule (microwatts), and there is no risk of overheating or electrical shock.
: Remove the cap and fill the clock's chambers with clean tap water. Ensure the water level is between the Minimum and Maximum lines. Then another
: Use fresh tap water, filtered water, or bottled water. Avoid distilled water, as it lacks the necessary ions for power, and acidic water, which can damage the internal components. Configuration Instructions The clock is controlled using buttons on the front: Setting the Time six times to enter the time-setting mode. to toggle between 12-hour and 24-hour formats. Cycle through hours by pressing until the correct hour appears, then press to select the minutes and press
: Press Mode twice to briefly display the current date. Alarm and Hourly Chime