Manual Casio Edifice Ef 514 |best| Jun 2026
Start/Stop: Press the top pusher (2 o'clock) to start the timer. Press it again to stop and check your elapsed time.Reset: Once the timer is stopped, press the bottom pusher (4 o'clock) to return all chronograph hands to the zero position. Calibrating the Hands
. Rotate it toward you (clockwise) until the correct date appears. Avoid doing this between 9:00 PM and 1:00 AM, as the date change mechanism is engaged and can be damaged. Set the Time : Pull the crown out to the second click Manual Casio Edifice Ef 514
Before diving into the button sequences, it is critical to understand the anatomy of the watch. The EF-514 features a stainless steel case and bracelet, Hardlex mineral glass, and a screw-down crown (typically located at the 3 o'clock position) flanked by two pushers. Start/Stop: Press the top pusher (2 o'clock) to
This function is useful if you want to measure a lap time without stopping the overall timer. Rotate it toward you (clockwise) until the correct
The Crown: This is the primary control knob located on the right side of the case. It has two "clicks" or positions:Position 1: Half-way out (used for date setting).Position 2: Fully extended (used for time setting).The Pushers: The buttons located at the 2 o'clock and 4 o'clock positions control the stopwatch (chronograph) features.Sub-dials: These track elapsed minutes, seconds, and sometimes a 24-hour clock or alarm setting, depending on the specific module variation. Setting the Time and Date