Slt-9001 Manual __exclusive__ Jun 2026

: Replace the CR2032 battery if the clock loses time after being unplugged.

You have a pre-release draft distributed to beta testers in 1995. Several pinouts (especially J6 and J7) are wrong. Find the “Rev B Final” version. slt-9001 manual

That is a known typo in the first printing (green cover). The corrected flowchart says: E-12 (ADC overrange) → Check input attenuator relays → If clicking, replace K1 (Teledyne 712-5). The green cover wrongly says “Check U7”. : Replace the CR2032 battery if the clock

Time (12/24hr), Date, Temperature (°C/°F), and 115 color options. Find the “Rev B Final” version

| Interval | Action | | :--- | :--- | | 250 Hours | Visual inspection of input filter capacitors for bulging. | | 500 Hours | Clean front panel air intake filter (part #SLT-901-FILT). | | 1000 Hours | Re-calibrate zero offset per Section 4.4. | | 2000 Hours | Replace internal lithium battery (CR2450, located near J6). Note: Loss of battery erases user calibration data. |

Do not download from “manualslib.com” pop-up clones or any site requiring a credit card for “instant access.” These PDFs are often missing pages 78–82 (the entire PLL troubleshooting section) and may contain malicious macros.