Body By Jake Tower 200 Installation Instructions New! «Recent»

Use a step ladder. Do not overtighten top bolts.

| Problem | Likely Cause | Solution | |---------|--------------|----------| | Grinding noise when lifting | Dry guide rods | Lubricate with silicone spray | | Plates don’t stack evenly | Bent guide rod | Replace rod (contact support) | | Cable slips off pulley | Slack in cable | Tighten anchor bolt (Step 4A) | | Tower wobbles | Loose base bolts | Re-tighten M8 bolts in Step 1 | body by jake tower 200 installation instructions

Before you begin, lay out all components on a soft surface (carpet or mat) to avoid scratching the metal. The Body by Jake Tower 200 should include: Use a step ladder

Move the pulleys to their lowest position on the frame. This creates slack in the ropes, making it much easier to stretch the unit over the door. 3. Attaching the Frame to the Door The Body by Jake Tower 200 should include:

Lay the Tower 200 on the floor and untangle the power ropes.