How To Open Fastboot Mode On Oppo Reno2 F ^new^
To open Fastboot Mode on an OPPO Reno2 F , you must first power off the device completely. Once shut down, simultaneously press and hold the and Power buttons until the Fastboot Mode screen appears .
| Problem | Likely Cause | Solution | |---------|--------------|----------| | adb reboot bootloader boots normally | Bootloader disabled Fastboot mode | Unlock bootloader using OPPO Deep Test | | Fastboot shows “Device locked” | Locked bootloader | Official unlock via OPPO request (may void warranty) | | Keys open Recovery instead of Fastboot | No hardware Fastboot on ColorOS | Use ADB or Engineer Mode ( *#36446337# ) | | fastboot devices shows ???????? | Driver issue | Install OPPO USB drivers or use Google’s USB driver |
If your hardware buttons are unresponsive or if you are already connected to a computer for development, you can use the Android Debug Bridge (ADB) . Flash with Fastboot - Android Open Source Project How to Open Fastboot Mode on OPPO Reno2 F
On standard Android devices, Fastboot is a diagnostic protocol that lets you re-flash partitions on your device. You typically access it via .
While you can enter Fastboot without a PC, you will eventually need one to execute fastboot commands. It is often smoother to have the USB cable connected to your computer before pressing the buttons. However, on OPPO devices, it is often easier to plug the cable in after the keys are pressed to avoid the device entering "Charge Only" mode. For beginners, we recommend doing this without the cable first. To open Fastboot Mode on an OPPO Reno2
Your phone will automatically restart and boot directly into Fastboot Mode.
However, accessing Fastboot on an OPPO device is notoriously different from other Android brands like Xiaomi, Google Pixel, or Samsung. OPPO has its own proprietary bootloader structure and a unique engineering protocol. | Driver issue | Install OPPO USB drivers
You likely used the wrong button combination. On the Reno2 F, Power + Volume Down enters Recovery. Power + Volume Up + Volume Down (while connected to PC) enters Fastboot.
Once you’re done flashing or troubleshooting, you can exit Fastboot by: