G2000 Canon: Resetter

Do not run the resetter preemptively. You only need it when the printer explicitly refuses to work. Look for these signs:

– with one caveat. If your Canon G2000 is out of warranty and displaying the “Ink Absorber Full” error, the G2000 Canon resetter is the most cost-effective solution available. For zero dollars (or a few dollars for a clean version), you can revive a printer that Canon wants you to throw away.

Q: How does the G2000 Canon Resetter work? A: The G2000 Canon Resetter works by connecting to your printer and communicating with its internal memory, sending a series of commands to reset the printer. g2000 canon resetter

When used responsibly, the Canon G2000 resetter can extend the life of your printer by years, saving you hundreds of dollars in service fees or replacement costs. It turns a frustrating “bricked” printer back into a reliable, high-volume printing machine.

The Canon PIXMA G2000 is part of Canon’s MegaTank series, designed for high-volume printing with low running costs. However, like all inkjet printers, it has a hidden component: the (or sponge). Do not run the resetter preemptively

A: Theoretically unlimited. Practically, after 3–4 resets, the physical sponge will be so saturated that ink will start dripping from the bottom vents. At that point, stop and clean it.

You should only use the resetter when you see the following signs: : Displayed on your computer screen. If your Canon G2000 is out of warranty

The Power (green) and Alarm (orange) lamps blink alternately 7 or 8 times. Step 1: Entering Service Mode (Mandatory)

: Resetting the software does not clean the actual ink pads. If you reset the counter multiple times without cleaning or replacing the physical sponges, ink may eventually leak out of the bottom of the printer.

A: No. The resetter only clears the error code. If your prints are streaky or misaligned, run a head cleaning cycle from the normal Canon software.

Using the resetter requires putting the printer into first. Step 1: Enter Service Mode Turn off the printer (but leave it plugged in). Press and hold the Stop/Reset button. While holding Stop/Reset, press and hold the Power button. Release the Stop/Reset button (while still holding Power). Press the Stop/Reset button 5 times rapidly. Release the Power button.