You will be prompted to create a strong password upon your first login.
To monitor failover, configure IP-Link or BFD. huawei ar651 configuration guide
[BRANCH-AR651] interface GigabitEthernet 0/0/1 [BRANCH-AR651-GigabitEthernet0/0/1] ip address 192.168.1.1 255.255.255.0 [BRANCH-AR651-GigabitEthernet0/0/1] quit You will be prompted to create a strong
| Command | Purpose | | --- | --- | | display version | Firmware and hardware info | | display ip interface brief | Status of all IP interfaces | | display ip routing-table | Active routes | | display nat session all | Active NAT translations | | display ipsec statistics | VPN tunnel status | | display cpu-usage | Router CPU load | | display memory | RAM utilization | Typically, you configure an Ethernet WAN (e
[Branch_Router] traffic classifier VOICE operator or [Branch_Router-classifier-VOICE] if-match dscp ef [Branch_Router] traffic behavior QUEUE_VOICE [Branch_Router-behavior-QUEUE_VOICE] queue ef bandwidth percent 30 [Branch_Router] traffic policy WAN_POLICY [Branch_Router-trafficpolicy-WAN_POLICY] classifier VOICE behavior QUEUE_VOICE [Branch_Router] interface GigabitEthernet 0/0/0 [Branch_Router-GigabitEthernet0/0/0] traffic-policy WAN_POLICY outbound
The AR651 excels at hybrid WAN. Typically, you configure an Ethernet WAN (e.g., GE0/0/0) and a 4G LTE backup (Cellular 0/0/0).