The printer will update and reboot. Wait for the “Ready” screen to appear before removing the USB drive.
You can use this for a blog post, a knowledge base article, or a technical support guide.
Open your browser, type the printer's IP address, and log in as Admin .
Disclaimer: Firmware updates carry risk. Always backup your settings. If the printer is under warranty or lease, check with your provider before proceeding. xerox b1025 firmware upgrade
Check that , IP Filtering , and Audit Log are still enabled if you previously set them.
| Error | Solution | | :--- | :--- | | | Verify the folder structure: USB: XEROX/B1025/firmwarefile.dlm | | Update freezes at 50% | Do not turn off. Wait 15 minutes. If stuck, restart printer – it may revert to previous version. | | Printer won’t boot after update | Perform a Non-Volatile Memory (NVRAM) reset: Turn off > Hold 1+2+Stop buttons > Turn on. | | “Invalid Signature” error | You downloaded the wrong model firmware. Re-download for “B1025” not “B1025i” or “B1022”. |
Even with careful preparation, problems can arise. Here is how to handle them. The printer will update and reboot
A: It is not recommended. Wi-Fi interruptions during the write process can corrupt the firmware. Use Ethernet or USB.
New updates often include critical security patches to protect your office network from cyber threats.
: Optimizes image processing for sharper scans and faster first-page-out times. How to Perform the Upgrade You can update your device using the Xerox CentreWare Internet Services (CWIS) web interface: Find your IP Address Open your browser, type the printer's IP address,
Every piece of software has bugs. Perhaps your B1025 has a habit of jamming when printing double-sided documents, or maybe the touch screen freezes intermittently. These are often software logic errors rather than hardware failures. Firmware updates frequently include "stability improvements" that resolve these nagging operational glitches, reducing downtime and user frustration.
Before proceeding, verify your current software level to see if an update is actually necessary.