The standard "Maintenance Mode" for everyday tasks like head cleaning and power flushing is found in your printer driver.
Now that the printer is in Maintenance Mode, you must communicate with it using the Adjustment Program. How to Open Maintenance Mode on EPSON L3151
Press and hold the Stop/Cancel button (triangle icon), then press and hold the Power button for about 5 seconds. Release both when the power light starts flashing. The printer will print a nozzle check pattern to show if the print heads are clogged. The standard "Maintenance Mode" for everyday tasks like
Only use Maintenance Mode for and serious service errors (usually 5-digit error codes starting with 0x). Release both when the power light starts flashing
Note: To exit Maintenance Mode, simply turn the printer off and on again.
If your printer shows a "Service Required" error (often due to the waste ink counter reaching its limit), this requires specific service utility software from the Epson Support site or third-party reset tools.
