Serious disturbances with strong functional limitations; these are stored in the log and displayed on the console. Fatal Errors (F):
Often related to the imaging system, specifically the Memoskop.
For processor or RAM errors (Codes 0, 1, or 2), technicians often start by testing the +5V power pack.
The Siremobil Compact L uses oil cooling for the X-ray tube housing and heat exchanger. siemens siremobil compact l error codes
While Information (I) and Warning (W) messages aren't always shown on the main display, they are stored in the Error Log if "Log warnings and infos" is activated in the service software.
| Error Code | Description | Probable Cause | Recommended Action | |------------|-------------|----------------|---------------------| | | C-arm rotation encoder failure | Broken encoder or loose belt | Replace position encoder | | E204 | Brake release timeout | Brake solenoid or relay stuck | Check brake PCB and 24V supply | | E210 | Collimator homing error | Limit switch or stepper motor failure | Manually move collimator; test motor |
Operating notices that do not affect function or appear on the basic unit display. The Siremobil Compact L uses oil cooling for
Issues with the collimator diaphragm or a defective D1 board.
The iris may have been moved by hand, or the actual value potentiometer is defective. Check the D1 board and iris motor. Videomed DC initialization timeout
The is a widely respected mobile C-arm fluoroscopy system, commonly found in operating rooms, pain management clinics, and emergency departments. Known for its reliability and image quality, it is not immune to technical faults. When an error occurs, the system displays an alphanumeric code on the control panel or monitors. For biomedical engineers, radiology technicians, and clinical staff, understanding these Siemens Siremobil Compact L error codes is the first step toward effective troubleshooting, minimizing downtime, and avoiding expensive service calls. Issues with the collimator diaphragm or a defective D1 board
Communication speed or buffer overflow during service connection.
Check the Memoskop acquisition cable (D1.X10.27). Inspect the Memoskop unit and internal connections. Main inverter short circuit
