Flip circuit breaker or pull power cord. Do not rely on electronic stop.
The filter is the heart of the system. Replace it on time, and your Caraflo will never let you down. caraflo v200 instructions
Before starting, ensure the pipework is flushed thoroughly to remove debris that could clog the internal filters. Flip circuit breaker or pull power cord
The Caraflo V200 is a reliable and efficient water filtration system that requires proper installation, maintenance, and troubleshooting to ensure optimal performance. By following the Caraflo V200 instructions outlined in this article, you'll be able to enjoy clean and safe drinking water for years to come. Remember to regularly check and maintain your system to prevent issues and ensure the longevity of your Caraflo V200. Replace it on time, and your Caraflo will never let you down
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | | Air lock or clogged filter | Re-prime by soaking filter overnight in cold water. If no improvement, replace filter. | | Black specks in filtered water | Incomplete initial rinse | Empty both chambers. Rinse filter again. Run 2 more priming cycles. | | Water tastes like plastic | New system or old filter | Wash chambers with vinegar solution. Replace filter if older than 6 months. | | Water leaks between chambers | Upper chamber not seated properly or cracked grommet | Check that filter is screwed tight. Replace rubber grommet. | | Spigot drips continuously | Debris in valve or worn spring | Remove spigot, clean with toothbrush. If still leaking, buy a replacement spigot. | | Lid doesn’t fit tightly | Warped from dishwasher or heat | Hand-wash only. Contact Caraflo for replacement lid. |
Regular cleaning prevents slime buildup (biofilm) and keeps flow rates high.