Reset | Hg8245h Factory
: Log in to the web interface (usually 192.168.100.1 ) and navigate to System Tools > Backup and Restore > Factory Reset .
After you finish reconfiguring your reset HG8245H, immediately go to System Tools > Configuration File and back up your settings to your computer. Next time, you can restore in 30 seconds instead of 30 minutes.
: With the device powered on, use a pin to press and hold the Reset button (located on the back or side) for 10–15 seconds until all lights flash.
The device will erase the configuration and reboot. Do not interrupt the power during this process. hg8245h factory reset
Look for a small pinhole labeled "RESET" on the back or side of the device.
Performing a factory reset will , including your Wi-Fi name, password, and ISP configuration. Physical Button Method (Hard Reset)
If you still remember the admin credentials, a soft reset is cleaner and faster. : Log in to the web interface (usually 192
The is one of the most popular Optical Network Terminals (ONTs) used by Internet Service Providers (ISPs) worldwide, including major carriers in the Middle East, Asia, Europe, and South America. It bridges the fiber-optic signal from your ISP to your home network, delivering triple-play services (Internet, VoIP, and IPTV).
This is the most common method and works regardless of the current IP address or admin password status. It is the go-to solution if you have forgotten your login credentials.
Connect your computer to the router (via Wi-Fi or Ethernet). Open a browser and go to 192.168.100.1 (or sometimes 192.168.1.1 depending on your ISP). Log in using the default credentials (often telecomadmin admintelecom or check the sticker on the bottom). System Tools Restore Default Configuration System Settings Factory Reset and confirm. Spiceworks Community Important Note: : With the device powered on, use a
Once the "Power" and "PON" lights are steady green, the is complete.
When you execute a factory reset on the Huawei HG8245H, the following occurs:
While you can perform the reset with the device offline, reconfiguring it is much easier via a hardwired Ethernet connection. Wi-Fi configuration can be flaky immediately after a reset if the computer tries to hang onto the old network settings.