Register list for Powerlogics PM2000 series - Schneider Electric
The PM2100 register list employs several data types: pm2100 modbus register list
| Parameter | Protocol Address (Dec) | Bit | Description | |-----------|------------------------|-----|-------------| | Digital I/O Status | 1500 | 0 | Digital Input 1 State (0=Open, 1=Closed) | | | 1500 | 1 | Digital Output 1 State (0=Off, 1=On) | | | 1500 | 2-15 | Reserved | | Digital Input Counter | 1501 | UINT32 | Accumulated pulses on DI (2 registers) | Register list for Powerlogics PM2000 series - Schneider
The PM2100 user manual specifies that the device uses as its default communication protocol. Unlike simpler devices, the PM2100 utilizes a protected command interface for configuration alongside standard holding registers for data retrieval. Common Data Registers for PM2100 Meters Use the Modbus map for trending (temp rise,
Do not try to do sub-cycle sag/swell analysis with this meter. Use the Modbus map for trending (temp rise, load creep, daily energy totals), not event capture .