Otosaver Das-7000fhd User Manual __hot__

To extend the life of your Otosaver Das-7000fhd:

The system automatically reboots periodically to ensure SD card stability and continuous operation. Maintenance Tips OTOSAVER DAS-7000FHD SD memory card formatting - Facebook Otosaver Das-7000fhd User Manual

| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | | Dead battery / Bad power cable | Check the cigarette lighter fuse. Try a different USB cable. Press the Reset pin hole. | | "Please insert SD Card" error | Card missing or corrupted | Remove and re-insert the card. Format the card in the camera menu. | | Recording stops after 2 seconds | Slow SD card or card full | Use a Class 10 card. Turn on Loop Recording and Format the card. | | Rear camera shows blue/no signal | Loose AV-IN connection | Unplug and reseat the rear camera cable. Check for cable damage. | | Date resets every time | Internal battery dead | The capacitor battery only holds power for 5-10 minutes. Replace the internal battery if under warranty. | | Video is blurry or foggy | Dirty lens or scratched | Clean the lens with a microfiber cloth. Remove protective plastic from the lens at first use. | | G-Sensor triggers too often | Sensitivity too high | Change G-Sensor from High to Medium or Low . | To extend the life of your Otosaver Das-7000fhd:

2-Channel recording with Full HD (1920 x 1080p) front and HD (1080 x 720p) rear. Press the Reset pin hole

Note: The base Das-7000fhd does NOT include Wi-Fi. If your unit has a Wi-Fi sticker, download "Otosaver Cam" from the App Store. Connect to the camera's SSID (password: 12345678).

Mastering Your Dashboard Camera: The Comprehensive Guide to the Otosaver Das-7000fhd User Manual