Domino A200 Inkjet Printer User Manual Patched

If the printer stops unexpectedly, check these common fault codes:

| Error Code | Meaning | User-Level Fix | | --- | --- | --- | | E-007 | Low make-up solvent | Replace the make-up cartridge. | | E-013 | Blocked nozzle (one or more jets) | Run "Jet Flush" cycle from F4 menu. If persists, manual clean with solvent and toothpick. | | E-022 | Printhead temperature out of range (below 15°C or above 45°C) | Move printer away from ovens or cold drafts. Wait 20 minutes. | | E-031 | Gutter blocked (ink not returning to tank) | Check for dried ink in the gutter tube. Flush with solvent syringe. | | E-045 | Encoder signal lost | Check the connection of the external encoder (proximity switch on the conveyor). Replace cable if damaged. | | E-088 | Ink out (even if cartridge looks half-full) | The chip on the smart cartridge has counted 1 million drops. Replace cartridge. | Domino A200 Inkjet Printer User Manual

Before powering on the unit, ensure all safety protocols are met to prevent equipment damage or personal injury. Installation Essentials If the printer stops unexpectedly, check these common

Have you faced a strange "Ink Jet Instability" error on your A200? The solution is on page 112. Go check. | | E-022 | Printhead temperature out of