Tower Crane Dismantling Method Statement Online

Specifically addressing falls from height, falling objects, and electrical hazards. Emergency Plan:

The remaining mast sections are unbolted and lowered one by one. Finally, the base section or undercarriage is disconnected from the foundation and removed from the site. 6. Transportation and Site Clearance

Dismantling follows a strict "top-down" approach to maintain the center of gravity: Counterweights:

Attaches loads to the mobile crane. Gives clear signals to the operator. tower crane dismantling method statement

Why is dismantling so dangerous? During erection, the crane is typically assembled at ground level or low heights using mobile assist cranes. During dismantling, the crane is often at full height, located in a confined space between completed structures, and subject to varying wind loads. The margin for error is non-existent. A "method statement" serves as the roadmap, translating engineering principles into step-by-step instructions for the crew.

After assessing the challenges, the team developed a detailed method statement for dismantling the tower crane. The statement outlined the step-by-step process, including:

After the jib is removed, the final counterweight is taken off. The counter-jib is then rigged, unbolted, and lowered. Why is dismantling so dangerous

The main boom is slung by a mobile crane, disconnected at the pins, and lowered to the ground. Counter Jib:

Tower Crane Dismantling Method Statement A tower crane dismantling method statement is a safe work procedure. It outlines the step-by-step sequence to safely remove a tower crane from a construction site. This document ensures compliance with occupational health and safety regulations. It mitigates risks associated with heavy lifting and working at heights. 1. Project Information & Scope Project Details [Insert Project Name] Site Location: [Insert Site Address] Principal Contractor: [Insert Company Name] Crane Owner/Provider: [Insert Supplier Name] Crane Specifications Crane Make & Model: [e.g., Liebherr 280 EC-H] Crane Type: [e.g., Top-slewing tower crane] Maximum Hook Height: [Insert Height in meters] Jib Length: [Insert Length in meters] Maximum Component Weight: [Insert Weight in metric tons] 2. Roles and Responsibilities

If the mobile crane or tower crane components fail, the exclusion zone remains active until the load is safely grounded or secured. Based on industry audits

Tower Crane Dismantling Method Statement a high-risk safety document that outlines the step-by-step sequence for taking down a crane . Its primary purpose is to maintain the structural balance of the crane throughout the process to prevent collapse.

Based on industry audits, avoid these errors: