Excellent pull-off strength on prepared steel.
Maintenance of structural steel where abrasive blasting is impractical Offshore installations and piping systems Sea water ballast tanks (PSPC type approved) Atmospheric environments up to C4 (per ISO 12944 Part 2) Technical Specifications Characteristic Mix Ratio (by volume) 7 parts Base : 1 part Hardener (Some variants may vary) Dry Film Thickness (DFT) 100 µm to 200 µm per coat (Typical: 150 µm) Theoretical Coverage 5.3 m²/litre at 150 µm DFT Flash Point 28°C (Mixed) VOC Content 180 gm/Litre Finish / Color Low Sheen; Standard color range (including Light Grey) Application Details
The reveals a product engineered for the harshest conditions on earth. With 100% volume solids, a 4:1 mixing ratio, and the ability to apply 750 microns in a single pass, it reduces labor costs while extending asset life by decades.
: Utilizing a product like the Epimastic 4100 TDS can help industries comply with safety standards and regulations, especially those related to environmental protection and worker safety.
Epimastic 4100 is tested against various international standards to ensure reliability.
Able to cure under adverse conditions, including temperatures down to 5°C and underwater. Safety and Handling Berger Epimastic 4100
Engineers typically specify Epimastic 4100 based on the TDS for the following assets:
Suitable for both immersion (non-potable water) and atmospheric exposure. Technical Specifications (Typical) Generic Type Epoxy Mastic Volume Solids ~80% (varies by color) Typical DFT 125 – 200 microns per coat Theoretical Coverage 4.0 – 6.4 m²/liter at typical DFT Semi-gloss / Eggshell Mixing Ratio
Always consult the full Material Safety Data Sheet (MSDS) before use. Ensure adequate ventilation and wear appropriate PPE, including gloves and respirators, during application. compatible topcoats for this product?
: The versatility of the Epimastic 4100 TDS allows it to be used across a range of applications, making it a valuable asset for industries that require flexible solutions.
Usually 3:1 or 4:1 by volume (Check specific batch label). Induction Time: 15–20 minutes at 25°C. Pot Life: 2 to 4 hours depending on ambient temperature.
Its primary function is to serve as a primer and finish coat system for carbon steel, stainless steel, aluminum, and concrete. It is notable for its ability to cure in low temperatures and high humidity, making it ideal for marine and offshore environments.
Excellent pull-off strength on prepared steel.
Maintenance of structural steel where abrasive blasting is impractical Offshore installations and piping systems Sea water ballast tanks (PSPC type approved) Atmospheric environments up to C4 (per ISO 12944 Part 2) Technical Specifications Characteristic Mix Ratio (by volume) 7 parts Base : 1 part Hardener (Some variants may vary) Dry Film Thickness (DFT) 100 µm to 200 µm per coat (Typical: 150 µm) Theoretical Coverage 5.3 m²/litre at 150 µm DFT Flash Point 28°C (Mixed) VOC Content 180 gm/Litre Finish / Color Low Sheen; Standard color range (including Light Grey) Application Details
The reveals a product engineered for the harshest conditions on earth. With 100% volume solids, a 4:1 mixing ratio, and the ability to apply 750 microns in a single pass, it reduces labor costs while extending asset life by decades.
: Utilizing a product like the Epimastic 4100 TDS can help industries comply with safety standards and regulations, especially those related to environmental protection and worker safety. epimastic 4100 tds
Epimastic 4100 is tested against various international standards to ensure reliability.
Able to cure under adverse conditions, including temperatures down to 5°C and underwater. Safety and Handling Berger Epimastic 4100
Engineers typically specify Epimastic 4100 based on the TDS for the following assets: Excellent pull-off strength on prepared steel
Suitable for both immersion (non-potable water) and atmospheric exposure. Technical Specifications (Typical) Generic Type Epoxy Mastic Volume Solids ~80% (varies by color) Typical DFT 125 – 200 microns per coat Theoretical Coverage 4.0 – 6.4 m²/liter at typical DFT Semi-gloss / Eggshell Mixing Ratio
Always consult the full Material Safety Data Sheet (MSDS) before use. Ensure adequate ventilation and wear appropriate PPE, including gloves and respirators, during application. compatible topcoats for this product?
: The versatility of the Epimastic 4100 TDS allows it to be used across a range of applications, making it a valuable asset for industries that require flexible solutions. : Utilizing a product like the Epimastic 4100
Usually 3:1 or 4:1 by volume (Check specific batch label). Induction Time: 15–20 minutes at 25°C. Pot Life: 2 to 4 hours depending on ambient temperature.
Its primary function is to serve as a primer and finish coat system for carbon steel, stainless steel, aluminum, and concrete. It is notable for its ability to cure in low temperatures and high humidity, making it ideal for marine and offshore environments.