If you need the or exact terminal layout for this specific variant (TE 102 34 20 — likely single relay, 8-pin base), let me know and I can generate a pin-accurate diagram or locate the official document source.
: Use a paper clip or pin to press the small reset button (often labeled ) to clear previous data. Setting the Day : Hold the button and press the
He ignored the warning. He needed more time—more than the world was willing to give. He toggled the button until the digits read 99:99 .
To toggle between 12-hour (AM/PM) and 24-hour modes, hold Clock and press the Timer button. Programming On/Off Events
The TE-102 typically supports up to 8 or 20 distinct On/Off cycles.
| Símbolo | Modo | Descripción | |---------|------|-------------| | | Retardo a la conexión (On delay) | Al activarse la señal, espera el tiempo T y activa el relé. | | Ħ | Retardo a la desconexión (Off delay) | Al retirar la señal, el relé permanece activo durante T. | | ↻ | Ciclo continuo (1T) | Comienza con el relé apagado → espera T → enciende → espera T → apaga (ciclo infinito). | | ↻↻ | Ciclo continuo con inicio On | Comienza con relé encendido → espera T → apaga → espera T → enciende. | | P | Generador de pulso (Monostable) | Al recibir señal, activa relé durante T y luego se apaga (señal de arranque por flanco). | | S | Temporizador con memoria | Retiene el tiempo transcurrido aunque se interrumpa la alimentación. |
Before programming schedules, you must calibrate the device to the current time:
Trigger ON → Delay → Relay ON → Trigger OFF → Relay OFF instantly.
to cycle through day options (e.g., individual days, Monday–Friday, or the entire week). Set "ON" Time to choose when the device should turn on. Set "OFF" Time again to see
Press the Clock button to save your settings and return to the main display. Operational Modes
Open the front cover or side DIP switches. Set switches to match desired unit and max range.
Press to choose the days this program should run (e.g., daily, weekdays, or specific days).
EEPROM retains last settings after power loss.
