Tmdscncd28379d-180ccard-pinout-r1-3 !new!

The TMS320F28379D is famous for its

In the rapidly evolving world of embedded systems and power electronics, Texas Instruments (TI) stands as a titan, providing robust hardware solutions for engineers and developers. Among their most versatile development tools is the C2000 real-time microcontroller family. Specifically, the —a controlCARD based on the powerful dual-core TMS320F28379D processor—is a staple in high-performance digital control applications.

software, providing the "blueprints" for the next generation of industrial automation. TMDSCNCD28379D Daughter card | TI.com - Texas Instruments

| Side | Pin # | Signal | ePWM Module | HRPWM capable | |------|-------|--------|-------------|----------------| | A | 15 | EPWM1A | ePWM1 | Yes | | A | 16 | EPWM1B | ePWM1 | Yes | | A | 17 | EPWM2A | ePWM2 | Yes | | A | 18 | EPWM2B | ePWM2 | Yes | | B | 15 | EPWM3A | ePWM3 | Yes | | B | 16 | EPWM3B | ePWM3 | Yes | | B | 17 | EPWM4A | ePWM4 | Yes | | B | 18 | EPWM4B | ePWM4 | Yes | | A | 21 | EPWM5A | ePWM5 | No (only A/B of 1-4) | | B | 21 | EPWM6A | ePWM6 | No | tmdscncd28379d-180ccard-pinout-r1-3

A 180-pin HSEC edge connector that provides access to nearly all I/O signals, including up to 169 individually programmable GPIO pins.

October 26, 2023 | Category: Hardware, Embedded Systems

Last updated: 2025 – for hardware revision R1.3. Always verify against the latest TI documentation for errata. The TMS320F28379D is famous for its In the

TI TMDSCNCD28379D Technical Reference Manual (R1.3 Pinout Table) (Note: Replace with actual URL)

Includes 1MB of ECC-protected flash, 204KB of RAM, and supports communications like USB 2.0 and dual External Memory Interfaces (EMIFs). Jumpers and Switches (R1.3)

The designation implies that this is the third major or minor iteration of the PCB design. Earlier revisions might have had errata related to the analog signal path, the JTAG debug interface routing, or power sequencing logic. When searching for schematics or datasheets, specifically looking for "tmdscncd28379d-180ccard-pinout-r1-3" ensures that you are looking at a document that matches the physical board in your hand. software, providing the "blueprints" for the next generation

In this post, we break down the standard 180-pin "ControlCARD" pinout mapping for the (R1.3).

Unlike earlier revisions, the R1.3 board includes improved on-card LDOs and power sequencing logic. Understanding the power pins is mandatory.

: Once the code is perfected, the developer might flip the boot mode switches to "Flash," allowing the card to run autonomously using only an external 5V power supply—no laptop required. Beyond the Schematic