Brushless Esc V2.3 Manual Upd Access

When you hear the beep pattern for the item you want to change (e.g., 2 short beeps for Battery Type), move the throttle stick to middle (neutral) within 3 seconds. The ESC will then beep to indicate sub-options (1 beep = option 1, 2 beeps = option 2, etc.).

Q: Can I use the Brushless ESC V2.3 with a brushed motor? A: No, the Brushless ESC V2.3 is specifically designed for brushless motors.

Supports continuous currents from 12A to 30A (model dependent) with a burst capacity up to 35A. brushless esc v2.3 manual

If your V2.3 ESC has a small button on the PCB:

covers several critical operational aspects for brushless RC flight systems. Core Programming Functions When you hear the beep pattern for the

: Toggling the motor brake on or off (essential for folding propellers on gliders). Battery Type Selection

A: No. “Brushless ESC” specifically requires a 3-phase brushless motor. A brushed motor will short the FETs. A: No, the Brushless ESC V2

Before connecting anything, identify the following parts:

Always connect the battery . The ESC V2.3 features an automatic arming sequence. With a 2S or 3S LiPo connected, you should hear a musical tone sequence:

: Selecting "Normal," "Soft," or "Very Soft" to manage initial torque.