skip to main content

: Use of respirators and gloves is required to prevent irritation to the skin, eyes, and respiratory tract.

3 parts Base to 1 part Hardener (by volume) or 7:1 depending on variant Typical DFT 150 microns (Range: 100–200 microns) Theoretical Coverage /litre at 150 microns DFT Flash Point 28 raised to the composed with power C 36 raised to the composed with power C 2–3 hours at 25 raised to the composed with power C Application Guidelines Surface Preparation : Remove all wax, oil, and grease according to guidelines. For immersion, abrasive blast-clean to Application Methods Airless Spray (Recommended) : Tip size 0.48–0.68 mm; Pressure 110–160 Conventional Spray : May require up to 10% thinning with Solvalux 7-45 Brush/Roller

The addition of Epimastic 4100 increases flexibility and impact resistance by over 300% while retaining >85% of the original tensile strength. The moderate reduction in Tg makes it ideal for applications requiring thermal cycling between -40°C and +90°C.

: Capable of curing at temperatures as low as 5°C and even underwater.

For the best results, refer to the Berger Epimastic 4100 Technical Data Sheet for specific site conditions. Berger Epimastic 4100

The heart of the Epimastic 4100 data sheet lies in the technical table. This grid provides the quantitative data required for specification writing.

The following table outlines the core technical data for Epimastic 4100 as it would appear on a standard manufacturer’s data sheet. All values represent typical properties and not minimum/maximum specifications unless noted.

Before diving into the specifics of the Epimastic 4100, it is essential to understand why the data sheet is so vital. In the coatings industry, a "data sheet" (often referred to as a Technical Data Sheet or TDS) is the identity card of a product. It outlines the chemical properties, application parameters, and safety requirements.

: Typically offers a shelf life of 12 to 24 months depending on the specific manufacturing region.