NOS M700 software is the dedicated driver utility designed for the NOS M-700 GM UL Spider

Assign specific colors to each level (e.g., Yellow for 800 DPI, Red for 6400 DPI) for instant visual feedback.

At the heart of the NOS Sniper and other modern progressive nitrous systems lies the NOS M700 controller. But hardware is nothing without the intelligence to drive it. This is where the ecosystem comes into play. Whether you are referring to the firmware embedded in the unit or the PC interface used to tune it, understanding this software is the key to unlocking safe, repeatable, and maximum horsepower.

| Component | Typical Spec | |-----------|---------------| | OS | Windows 10/11 IoT or Android (varies by deployment) | | CPU | Intel Atom or Core m3 (fanless) | | RAM | 4–8 GB | | Storage | 64–256 GB SSD | | Display | 7"–10" sunlight-readable touchscreen | | Connectivity | 4G/5G LTE, GPS, Wi-Fi, Bluetooth | | Durability | IP65 or higher, MIL-STD-810G |

Logs are saved as .csv files for analysis in Excel or Python.

END_PROGRAM

PROCEDURE HomeSequence() // Soft homing routine MOVE_VELOCITY(Z := 50); // Move up slowly WAIT_FOR(LIMIT_SWITCH_Z_POS = TRUE); MOVE_STOP(Z); RESET_POSITION(Z, 0.0); MOVE_ABSOLUTE(Z := 50, VEL := 100); END_PROCEDURE

CAM TABLE: Conveyor_Position vs. Pick_Height 0 mm -> 50 mm 100 mm -> 10 mm (descend) 200 mm -> 50 mm (ascend)

// Main loop WHILE (TRUE) DO // Move to pick position (X only, Z at safe height) MOVE_LINEAR(X := PickX, Z := SafeZ, VEL := 300);