Schmersal De- 42279 Datasheet Page

Compact design allows for installation in tight machine enclosures.

Schmersal uses a standard logic:

The DE-42279 likely has auto-start or monitored manual start (via S33/S34). The datasheet will show a jumper configuration for these modes. schmersal de- 42279 datasheet

Always perform a functional test after installation. The machine should stop immediately when the guard is opened and should not restart until the guard is closed and the "Start" command is given. ⚖️ Standards and Certifications

Since the file is marked "DE," it may be exclusively in German. Use the following table to translate key sections: Compact design allows for installation in tight machine

Disclaimer: This article is for informational purposes. Product specifications change. Always refer to the original manufacturer’s documentation (K.A. Schmersal GmbH & Co. KG) for final design and safety validation.

Based on your search for this identifier, you are likely looking for information on a common Schmersal safety device, such as the or RSS 260 electronic safety sensors, which frequently feature this address. Below is a report summarizing the typical technical data for these common safety components found at this manufacturer location. Always perform a functional test after installation

If your safety system uses a component documented under datasheet 42279, you are likely dealing with a . Typical applications include:

IP67 (Dust-tight and protected against immersion). Actuating Speed: Maximum 2 m/s. 📋 Features and Benefits