Slide out and completely remove Tray 3 or any other high-capacity input feeders, then try to boot the printer.
While the printer labels it a "jam," the causes can range from physical obstructions to software anomalies. Here are the primary culprits:
HP LaserJets have a hidden pre-boot menu that bypasses corrupted settings. hp 61.00.00 error
: Physically disconnect any extra paper trays (like Tray 3 ) or external hardware. These can sometimes draw too much power or cause communication interrupts during startup.
Note: For printers costing less than $100 (like the M15w), it is usually cheaper to buy a new printer than to replace the formatter board. Slide out and completely remove Tray 3 or
| Cause | Description | |-------|-------------| | | Incomplete or interrupted firmware update (e.g., power loss during update). | | Faulty formatter board | Hardware failure on the main logic board. | | Corrupt NAND flash | Memory chip storing firmware has bad sectors. | | Incompatible firmware | Flashing wrong firmware version for the printer model. | | Power surge | Sudden voltage spike corrupted system files. |
| Error Code | Meaning | |------------|---------| | 61.00.01 | NAND flash read error | | 61.00.02 | NAND flash write error | | 61.00.03 | Firmware integrity check failure | : Physically disconnect any extra paper trays (like
Seeing this error can be alarming. Does it mean your printer is dead? Do you need to buy a new one? Fortunately, the answer is almost always . The 61.00.00 error is a specific code related to firmware corruption or a boot-up failure. In most cases, it can be resolved with a simple power cycle or a manual firmware upgrade.