Kenko Kk-613d Manual Jun 2026

(see diagram in original manual):

Used to change values (increments) or check the current date. 1. Setting the Time & Date To enter the time-setting mode, press the three times

Never use ABS mode unless you are performing comparative measurements against a gauge block. For 99% of users, ignore the ABS button entirely. kenko kk-613d manual

Most user complaints about the KK-613D stem from battery issues, not mechanical failure. Here is how to start correctly:

one last time (indicated by a marker at the top/bottom of the screen); use to select the correct day. to save and return to the main clock display. 2. Setting the Alarm To enter alarm-setting mode, press the The hours will flash. Press to change the hour. to switch to minutes, then press to adjust. to return to the main screen. Checking/Activating the Alarm: on the main screen to see the current alarm time. Turn On/Off the alarm: While holding (see diagram in original manual): Used to change

Typically powered by a single AG10 or LR1130 button battery (some versions may list AA compatibility).

Press to cycle through seconds, minutes, hours, day of the week, and month. Press D to advance the value for the selected unit. Press M to save and return to the main display. Setting the Alarm: Press M twice to enter alarm-setting mode. Press S to toggle between hours and minutes. Use D to adjust the numbers. Press M to exit. Stopwatch Function: For 99% of users, ignore the ABS button entirely

Here is the detailed content for the digital caliper manual. This is a composite of standard functions based on the common model; if you have a specific feature variation, please refer to your physical documentation.

from the main clock screen. The seconds should start flashing. to reset seconds to zero. once. The minutes will flash; use to adjust. again. The hours will flash; use

: Operates on a single LR1130 (AG10) button cell battery.