Makerbase Mks Dlc V2.1 Manual -

The MKS DLC V2.1 offers a wide range of advanced features and configuration options that can help you optimize your 3D printing workflow. Here are a few examples:

| Pin | Signal | Function | | :--- | :--- | :--- | | 1 | +5V | Logic power | | 2 | HE0 | Heater 0 control | | 3 | TH0 | Thermistor 0 signal | | 4 | FAN1 | Fan control | | 5 | GND | Ground | | 6 | LASER2 | PWM for Laser 2 |

Check the USB cable and ensure the CH340 driver is updated in your Device Manager. Makerbase Mks Dlc V2.1 Manual

Here is the user manual text for the (Double Layer Control Board V2.1), typically used in DIY laser engravers and CNC machines.

The MKS DLC V2.1 is a high-performance, dual-layer control board designed for laser engravers (e.g., diode lasers) and small CNC routers. It is based on the 32-bit ARM Cortex-M4 architecture (STM32F407VGT6) and integrates TMC2209 silent stepper drivers. The "Double Layer" design separates power and logic circuits to reduce electrical interference. The MKS DLC V2

With its powerful ARM32-bit processor and 128M SD card, the MKS DLC V2.1 is well-equipped to handle demanding print jobs with ease. The controller also features a range of connectivity options, including USB, SD card, and Ethernet, making it easy to integrate with your existing workflow.

In Configuration.h , you must define the pins for the second hotend and laser. With its powerful ARM32-bit processor and 128M SD

1.0 Last Updated: March 2025 Manufacturer: Makerbase Technology Co., Ltd.

this is the new MKS DLC32 CNC control board from Makeabase. you can use this board to control your CNC machine wirelessly over Wi- YouTube·Superb Tech