Once in the DHCP Server section, you can modify the following: DHCP Server : Set this to to enable automatic IP assignment. Start IP Address : The first IP in the range (e.g., 192.168.1.2 End IP Address : The last IP in the range (e.g., 192.168.1.80 Lease Time
To reset completely: (this erases all customizations).
Under the DHCP Server section, set:
: Ensure the checkbox or toggle for "DHCP Server" is set to On or Enable .
| Problem | Likely Cause | Solution | |---------|--------------|----------| | Device gets wrong IP (e.g., 169.254.x.x) | DHCP server unreachable | Check if DHCP is enabled; reboot router; check cable/WiFi | | IP conflict warning | Static IP within DHCP pool or duplicate reservation | Move static IPs outside pool range | | Reservation not working | MAC address typo or device uses random MAC (privacy feature) | Disable "Private Wi-Fi Address" on iOS/Android for your network | | Cannot access router after disabling DHCP | Lost connection to gateway | Set a static IP on your PC (e.g., 192.168.1.50, mask 255.255.255.0, gateway 192.168.1.1) to regain access | Configure DHCP on ZTE ZXHN H267N Cyta
In the same DHCP section, you can set which DNS servers are given to clients.
To configure DHCP on the ZTE ZXHN H267N Cyta router, follow these steps: Once in the DHCP Server section, you can
If you encounter issues with DHCP, check the following:
In this article, we will provide a step-by-step guide on how to configure DHCP on the ZTE ZXHN H267N Cyta router. We will cover the basics of DHCP, the benefits of using it, and the specific configuration steps for this router model. | Problem | Likely Cause | Solution |
: Define how long a device keeps its assigned IP before it must renew (often set in seconds or minutes). DNS Settings